LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Access CM >> Removal

Keyless Access CM: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pocket COMPL and the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL>BACK PANEL .
  3. Remove the blower motor relay.
    G14612849Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the keyless access control module.
    CAUTION: Be careful to keep water and other foreign materials away from the keyless access control module terminals.
    1. Disconnect the connector.
    2. Release the claws using a flat tip screwdriver or similar tool wrapped with protection tape.
    3. Release the guides and remove the keyless access control module.
      G14612850Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals