LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Installation >> Hood Cable Assembly

Hood Cable Assembly

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Check the cable for deformation such as fray before installation.
  2. Install the cable assembly front hood.
    NOTE: Tie the string left on the body to the cable assembly front hood and pull it out of the vehicle.
  3. Install the opener handle.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  4. Install the lock assembly front hood. Ref. to SECURITY AND LOCKS>FRONT HOOD LOCK ASSEMBLY>INSTALLATION>HOOD LOCK ASSEMBLY .
  5. Install the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION .
  6. Install the mud guard front LH. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals