Confirm Current Setting
- On [Start] screen, select [Diagnosis].
- On [Vehicle selection] screen, input the target vehicle information and select [OK].
- On [Main Menu] screen, select [Each System].
- On [Select System] screen, select [Body Control], and then select [Enter].
- On [Select Function] screen, select [Customize].
- Save the setting.
REQUIRED ITEMS FOR NEW REGISTRATION (EXCEPT FOR SYSTEM NOT EQUIPPED)
| Item | Contents | Remarks | |||
|---|---|---|---|---|---|
| Off delay time | OFF | 10 Sec | 20 Sec | 30s | - |
| Auto Light Sensitivity Adjustment | Dull | Normal | Sensitive | Very sensitive | - |
| Remote Trunk Open/Power Rear Gate Open Function | OFF | Twice Push | Long Push | - | |
| Power rear gate setting | Exist | Not Exist | - | ||
| Lane change signal setting | Exist | Not Exist | - | ||
| Rear wiper auto setting | Exist | Not Exist | - | ||
| Driver's Door Unlock Setting | ALL | Selection | Option setting | ||
| Rear Gate Unlock Setting | Selection | All | - | ||
| Daytime Running Light (DRL) Setting for North America | High Beam Dimming System Low Beam Dimming System Alternate DRL System | - | |||
| Wiper link Auto Light Setup | ON | OFF | - | ||
| Steering Wheel | Left | Right | - | ||
| Vehicle Automatic Door Lock | OFF Vehicle Speed Select Lever P | - | |||
| Vehicle Automatic Door Unlock | OFF Select Lever P Power OFF Driver Door Open | - | |||
| P/W ECU Setting | No Support Driver Seat Driver/Passenger Seat Four Seat | - | |||
| Head Lamp Low Beam Specification | Halogen HID LED | Customizing setting values do not affect the vehicle behavior. Therefore, keep the initial setting values. | |||
| Head Lamp High Beam Specification | Halogen HID LED | Customizing setting values do not affect the vehicle behavior. Therefore, keep the initial setting values. | |||
| High Beam Assist Current Setting | ON | OFF | Option setting | ||
| High Beam Assist Function Setting (mirror/EyeSight) | Not Exist mirror HBA EyeSight HBA | - | |||
| Rr Defogger op. mode | Normal | Continuous | - | ||
| Security Alarm Setup | ON | OFF | - | ||
| Alarm delay setup | ON | OFF | - | ||
| Lockout prevention | ON | OFF | - | ||
| Buzzer sounding setting | ON | OFF | - | ||
| Hazard answer-back setup | ON | OFF | Option setting | ||
| Door open warning | Exist | Not Exist | - | ||
| Dome Light Alarm Setting | ON | OFF | - | ||
| Auto A/C Setting | Active | OFF | - | ||
| wiperdeicer | Exist | Not Exist | - | ||
| Sedan/Wagon Setting | Wagon | Sedan | - | ||
| MT/AT Setting | MT | AT | - | ||
| Destination Setting | JPN, KA, KC, KS, Europe LHD models except for KS, CO, C5, U4, U5, U6, EK, ER | - | |||
| Illumination Sensor Setting | Exist | Not Exist | - | ||
| Factory initial setting | Factory | Market | Do not set to Factory mode. | ||
| EPB setting | Exist | Not Exist | - | ||
| Sunroof setting | Exist | Not Exist | - | ||
| Welcome Light (Exit) | OFF 30 seconds 60 seconds 90 seconds | - | |||
| Welcome Light Off Delay Time (Approaching) | OFF 30 seconds 60 seconds 90 seconds | - | |||
| Keyless Buzzer Volume | 1 2 3 4 5 6 7 | Option setting | |||
| Auto Dimmer Cancel Setting | 0 (OFF) Least Less Normal More Most | - | |||
| Light LIN setting | Exist | Not Exist | - | ||