LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Rear Seat Reclining System >> Removal >> Reclining Lever

Reclining Lever

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pad rear side. Ref. to SEATS>REAR SEAT>REMOVAL .
  3. Remove the lever assembly reclining.
    1. Remove the screws, and then remove the bracket.
    2. Release the claws, and then remove the lever assembly reclining from the pad rear side.
      G13625677Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals