Function Halt Code(s) Display: Operation

If the function temporary stop code is detected from the stereo camera, part of the EyeSight functions will be stopped temporarily and cannot be used. When the failure is resolved, the function starts operating.

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select [EyeSight], and then select [Enter].
On [Select Function] screen, select [Cancel Code].
On [Cancel Code] screen, select [Function Halt Code(s) Display].

NOTE:

For detailed operation procedures, refer to "Help" of application.
Up to 20 codes can be stored. When 21 codes or more are output, the oldest code among the most generated codes will be deleted to store the latest code.
Stored codes will be cleared by Clear Memory. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
For details on the function temporary stop code, refer to the list of function temporary stop code. Ref. to EYESIGHT (DIAGNOSTICS)>FUNCTION HALT CODE(S) DISPLAY>LIST .