Work Support: List
| Item | Contents | Remarks | ||
|---|---|---|---|---|
| Actuator Origin Reset | Performing compensation of original point can correct the offset of operation for each actuator. | Ignition switch ON
NOTE:
Engine ON recommended
|
||
| Variable compressor break-in drive | [Variable compressor break-in drive] must be performed due to the compressor protection, when the compressor assembly was replaced with a new one. | For more detail, refer to the compressor installation. Ref. to AIR CONDITIONER>COMPRESSOR>INSTALLATION . | ||
| Read Control module setting information* | If the A/C control panel is replaced, it is possible to read the A/C personal setting information of the driver monitoring system set by the user using Subaru Select Monitor, and write it to the new A/C control panel. |
NOTE:
Engine ON recommended
|
||
| Write Control module setting information(1) | If the A/C control panel is replaced, it is possible to read the A/C personal setting information of the driver monitoring system set by the user using Subaru Select Monitor, and write it to the new A/C control panel. |
|
||
|
||||