LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Forester Base >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> General Description >> Preparation Tool >> Special Tool

Special Tool

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05002948Courtesy of SUBARU OF AMERICA, INC.
 398177700 INSTALLER Used for installing the rear bearing inner race. (VB-type)
G05032445Courtesy of SUBARU OF AMERICA, INC.
 398217700 ATTACHMENT SET Used for disassembly and assembly of differential carrier.
G05662504Courtesy of SUBARU OF AMERICA, INC.
 398417700 DRIFT Used for installing the side bearing outer race. (VB-type)
G04994005Courtesy of SUBARU OF AMERICA, INC.
 398437700 OIL SEAL INSTALLER Used for installing the differential side retainer oil seal. (VB-type)
G05032444Courtesy of SUBARU OF AMERICA, INC.
 398477701 HANDLE
  • Used for installing the front bearing outer race. (VA-type)
    NOTE: Used together with DRIFT (498447110).
  • Used for installing the rear bearing outer race.
NOTE:
  • Used together with DRIFT (398477702). (VA-type)
  • Used together with DRIFT 2 (398477703). (VB-type)
G05342961Courtesy of SUBARU OF AMERICA, INC.
 398477702 DRIFT
  • Used for installing the rear bearing outer race. (VA-type)
    NOTE: Used together with HANDLE (398477701).
  • Used for installing the side bearing outer race. (VA-type)
G05032452Courtesy of SUBARU OF AMERICA, INC.
 398477703 DRIFT 2
  • Used for installing the front bearing outer race. (VB-type)
    NOTE: Used together with INSTALLER (18654AA000).
  • Used for installing the rear bearing outer race. (VB-type)
NOTE: Used together with HANDLE (398477701).
G04990233Courtesy of SUBARU OF AMERICA, INC.
 398487700 DRIFT Used for installing the side bearing inner race. (VB-type)
G05002462Courtesy of SUBARU OF AMERICA, INC.
 398497701 SEAT Used for removing the side bearing inner race. (VB-type)
NOTE: Used together with PULLER SET (899524100).
G05342971Courtesy of SUBARU OF AMERICA, INC.
 398507704 BLOCK Used for adjusting preload for front bearing and rear bearing. (VA-type)
NOTE: Used together with DUMMY SHAFT (498447150).
G05002431Courtesy of SUBARU OF AMERICA, INC.
 398527700 PULLER ASSY Used for removing the side bearing outer race.
NOTE: Used together with CLAW (18760AA000). (VB-type)
G05032468Courtesy of SUBARU OF AMERICA, INC.
 399520105 SEAT Used for removing the side bearing inner race. (VA-type)
NOTE: Used together with PULLER SET (899524100).
G05032458Courtesy of SUBARU OF AMERICA, INC.
 399703600 PULLER ASSY Used for removing companion flange.
G05002914Courtesy of SUBARU OF AMERICA, INC.
 399780104 WEIGHT Used for installing the drive pinion.
G05002944Courtesy of SUBARU OF AMERICA, INC.
 498077400 REMOVER Used for removing the drive pinion. (VA-type)
G05342994Courtesy of SUBARU OF AMERICA, INC.
 498175500 INSTALLER Used for installing the rear bearing inner race. (VA-type)
G05032447Courtesy of SUBARU OF AMERICA, INC.
 498427200 FLANGE WRENCH
  • Used for removing and installing the self-locking nut of companion flange.
  • Used for adjusting hypoid gear set backlash.
  • Used for adjusting preload on the side bearing.
G08318430Courtesy of SUBARU OF AMERICA, INC.
 498447100 INSTALLER Used for installing the differential side retainer oil seal. (VA-type)
G05343000Courtesy of SUBARU OF AMERICA, INC.
 498447110 DRIFT Used for installing the front bearing outer race. (VA-type)
NOTE: Used together with HANDLE (398477701).
G05032446Courtesy of SUBARU OF AMERICA, INC.
 498447120 INSTALLER Used for installing the differential front oil seal.
G05343001Courtesy of SUBARU OF AMERICA, INC.
 498447150 DUMMY SHAFT
  • Used for adjusting preload for front bearing and rear bearing. (VA-type)
    NOTE: Used together with BLOCK (398507704).
  • Used for adjusting drive pinion height. (VA-type)
NOTE: Used together with DIFFERENTIAL CARRIER GAUGE (498505501).
G05342998Courtesy of SUBARU OF AMERICA, INC.
 498485400 DRIFT Used for installing the side bearing inner race. (VA-type)
G05342999Courtesy of SUBARU OF AMERICA, INC.
 498505501 DIFFERENTIAL CARRIER GAUGE Used for adjusting drive pinion height. (VA-type)
NOTE: Used together with DUMMY SHAFT (498447150).
G05002464Courtesy of SUBARU OF AMERICA, INC.
 899524100 PULLER SET Used for removing the side bearing inner race.
  • Puller
  • Cap
    NOTE:
    • Used together with SEAT (399520105). (VA-type)
    • Used together with SEAT (398497701). (VB-type)
G05002459Courtesy of SUBARU OF AMERICA, INC.
 899580100 INSTALLER
  • Used for installing the front bearing inner race.
  • Used for installing the pilot bearing.
G05032459Courtesy of SUBARU OF AMERICA, INC.
 899874100 INSTALLER Used for installing the companion flange.
G05002937Courtesy of SUBARU OF AMERICA, INC.
 899904100 STRAIGHT PIN REMOVER Used for removing and installing the spring pin.
G06338208Courtesy of SUBARU OF AMERICA, INC.
 18270KA020 SOCKET (E20) Used for removing and installing the driven gear. (VA-type)
G05003214Courtesy of SUBARU OF AMERICA, INC.
 18654AA000 INSTALLER Used for installing the front bearing outer race. (VB-type)
NOTE: Used together with DRIFT 2 (398477703).
G13591433Courtesy of SUBARU OF AMERICA, INC.
 18658AA021 WRENCH COMPL RETAINER
  • Used for removing and installing the differential side retainer.
  • Used for adjusting hypoid gear set backlash.
G05032464Courtesy of SUBARU OF AMERICA, INC.
 18678AA000 DUMMY SHAFT
  • Used for adjusting preload for front bearing and rear bearing. (VB-type)
  • Used for adjusting drive pinion height. (VB-type)
NOTE: Used together with DIFFERENTIAL CARRIER GAUGE (18831AA010).
G05003213Courtesy of SUBARU OF AMERICA, INC.
 18720AA000 REMOVER Used for removing the rear bearing inner race. (VB-type)
G05003217Courtesy of SUBARU OF AMERICA, INC.
 18760AA000 CLAW Used for removing the side bearing outer race. (VB-type)
NOTE: Used together with PULLER ASSY (398527700).
G05032465Courtesy of SUBARU OF AMERICA, INC.
 18831AA010 DIFFERENTIAL CARRIER GAUGE Used for adjusting drive pinion height. (VB-type)
NOTE: Used together with DUMMY SHAFT (18678AA000).
G05032383Courtesy of SUBARU OF AMERICA, INC.
 28099PA090 OIL SEAL PROTECTOR Used for installing the rear drive shaft.
G07666153Courtesy of SUBARU OF AMERICA, INC.
 41399FG001 SPECIAL TOOL ASSY
  • Used for removing and installing the rear differential mount bushing.
    CAUTION: Apply the molybdenum grease on the threads.
  • Use (1), (2), (5), (6), (7), (8) and (9) for removal.
  • Use (3), (4), (5), (6), (7), (8) and (9) for installation.
    1. SPECIAL TOOL A (41399FG010)
    2. SPECIAL TOOL C (41399FG031)
    3. SPECIAL TOOL B (41399FG020)
    4. SPECIAL TOOL D (41399FG041)
    5. SPECIAL TOOL SLEEVE (41399FG050)
    6. SPECIAL TOOL RING (41399FG061)
    7. SPECIAL TOOL NUT (41399FG070)
    8. SPECIAL TOOL BEARING (41399FG080)
    9. SPECIAL TOOL SHAFT (41399FG091)
G06650004Courtesy of SUBARU OF AMERICA, INC.
 41399FG010 SPECIAL TOOL A Used for removing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650005Courtesy of SUBARU OF AMERICA, INC.
 41399FG020 SPECIAL TOOL B Used for installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666156Courtesy of SUBARU OF AMERICA, INC.
 41399FG031 SPECIAL TOOL C Used for removing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666157Courtesy of SUBARU OF AMERICA, INC.
 41399FG041 SPECIAL TOOL D Used for installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650008Courtesy of SUBARU OF AMERICA, INC.
 41399FG050 SPECIAL TOOL SLEEVE Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666159Courtesy of SUBARU OF AMERICA, INC.
 41399FG061 SPECIAL TOOL RING Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650010Courtesy of SUBARU OF AMERICA, INC.
 41399FG070 SPECIAL TOOL NUT Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650011Courtesy of SUBARU OF AMERICA, INC.
 41399FG080 SPECIAL TOOL BEARING Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666162Courtesy of SUBARU OF AMERICA, INC.
 41399FG091 SPECIAL TOOL SHAFT Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G10289719Courtesy of SUBARU OF AMERICA, INC.
 - SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE:
  • For detailed operation procedures, refer to "Help" of application.
  • Used together with interface for Subaru Select Monitor (such as DST-i and DST-010).
scientia non olet · About LEMON Manuals