Sunroof Assembly: Installation

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
Be careful not to snag the harness.
Connect the harness connector firmly.

Install the tube drains.
Install the bracket sunroof and the frame sunroof.
Tightening torque:

6 N.m (0.61 kgf-m, 4.4 ft-lb)
Install the bolt which secures the curtain airbag module.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the harness connector of the tube drain and the motor assembly.
CAUTION: Insert the tube drain until it contacts the end of drain pipe (a).

Courtesy of SUBARU OF AMERICA, INC.
Install the trim panel sub assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>INSTALLATION .
Install the lid assembly. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>GLASS LID>INSTALLATION>GLASS LID .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .