LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control System >> MT Gear Shift Lever >> Removal >> 5MT Model

5MT Model

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the gear shift knob by turning it counterclockwise.
  3. Remove the cover assembly front. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>REMOVAL .
  4. Remove the panel center LWR LH and RH. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CONSOLE>REMOVAL .
  5. Remove the clamp.
    G08550626Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the boot and insulator assembly.
    G08550627Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the harness clamp from the plate COMPL.
    G08550628Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the plate COMPL from the vehicle body.
    G08550629Courtesy of SUBARU OF AMERICA, INC.
  9. Lift up the vehicle.
  10. Remove the rear exhaust pipe and center exhaust cover. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>REAR EXHAUST PIPE>REMOVAL .
  11. Remove the stay from the shift bracket.
    G16350104Courtesy of SUBARU OF AMERICA, INC.
    (A) Stay
    (B) Shift bracket
  12. Remove the rod from joint.
    G16350105Courtesy of SUBARU OF AMERICA, INC.
    (A) Stay
    (B) Rod
  13. Remove the cushion rubber from the vehicle body.
    G16350106Courtesy of SUBARU OF AMERICA, INC.
    (A) Stay
    (B) Cushion rubber
  14. Extract the spring pin and remove the joint.
    G16350107Courtesy of SUBARU OF AMERICA, INC.
    (A) Joint
    (B) Spring pin
  15. Remove the gear shift lever from the bottom of the vehicle.
scientia non olet · About LEMON Manuals