LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr580) - CROSSTREK >> X MODE Switch >> Inspection

X MODE Switch: Inspection

G13233241Courtesy of SUBARU OF AMERICA, INC.
  1. Check the resistance between connector terminals.
    Terminal No. Inspection conditions Standard
    1 - 4 OFF (when measured without operating the switch) Approx. 1 MΩ
    ON (when measured with the switch held down) Less than 1 Ω
  2. Apply battery voltage between the connector terminals to check lighting status of illumination.
    CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side. Incorrect polarity connection may cause LED damage inside the switch.
Terminal No. Inspection conditions Judgment standards
2 (+) - 3 (-) Apply battery voltage. Light ON
scientia non olet · About LEMON Manuals