LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr580) - CROSSTREK >> Relay and Fuse >> Inspection

Relay and Fuse: Inspection

  1. CHECK FUSE 
    1. Remove the fuse and inspect visually.
    2. If the fuse is blown out, replace the fuse.
      NOTE: If the fuse is blown again, check the system wiring harness.
  2. CHECK RELAY 
    1. Check that there is no deformation, cracks or other damages.
    2. Check the resistance between terminals.
      G11252918Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Standard
3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
3 - 4 Always 1 MΩ or more
scientia non olet · About LEMON Manuals