LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (HEV)) >> Engine Oil Temperature Sensor >> Removal

Engine Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire  .
  1. Disconnect the ground terminal from battery, Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the engine oil temperature sensor from the chain cover.
    G16347153Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals