LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection System (Except For HEV) >> Engine Coolant Temperature Sensor >> Installation >> 2.0 L Model

2.0 L Model

  1. Place a new gasket and install the engine coolant temperature sensor.

    Tightening torque: 

    16 N.m (1.6 kgf-m, 11.8 ft-lb)

  2. Connect the connector to engine coolant temperature sensor.
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE BOOT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  5. Fill engine coolant. Ref. to COOLING (H4DO (EXCEPT FOR HEV))>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .
scientia non olet · About LEMON Manuals