SUBARU Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for installing the dust cover.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case oil seal. Used for removing the oil seal of the oil pump.
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring line pressure. NOTE: Used together with OIL PRESSURE ADAPTER SET (498897700) and OIL PRESSURE GAUGE ADAPTER (18681AA040).
Courtesy of SUBARU OF AMERICA, INC.	498897700	OIL PRESSURE ADAPTER SET	Used for measuring line pressure. NOTE: Used together with OIL PRESSURE GAUGE ASSY (498575400) and OIL PRESSURE GAUGE ADAPTER (18681AA040).
Courtesy of SUBARU OF AMERICA, INC.	499755602	PRESS SNAP RING	Used for installing the oil seal of the oil pump.
Courtesy of SUBARU OF AMERICA, INC.	18334AA000	PULLEY WRENCH PIN SET	Used for removing and installing the drive plate. NOTE: Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for removing and installing the drive plate. NOTE: Used together with PULLEY WRENCH PIN SET (18334AA000).
Courtesy of SUBARU OF AMERICA, INC.	18632AA010	STAND ASSY	Used for removing and installing transmission body. NOTE: Attach a rubber sheet with double sided tape, etc. before use. Used for removing and installing transmission rear crossmember. NOTE: Attach a rubber sheet with double sided tape, etc. before use. Used for removing and installing the rear cushion rubber. NOTE: Attach a rubber sheet with double sided tape, etc. before use.
Courtesy of SUBARU OF AMERICA, INC.	18657AA010	INSTALLER	Used for installing the manual valve lever shaft oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18679AA020	ADJUSTER	Used for removing and installing transmission body. NOTE: Used together with ENGINE HANGER (99099AJ000).
Courtesy of SUBARU OF AMERICA, INC.	18681AA040	OIL PRESSURE GAUGE ADAPTER	Used for measuring line pressure. NOTE: Used together with OIL PRESSURE GAUGE ASSY (498575400) and OIL PRESSURE ADAPTER SET (498897700). Use the genuine O-ring (part No. 17006AA000) for installation.
Courtesy of SUBARU OF AMERICA, INC.	18750AA010	STOPPER SET	Used for removing and installing transmission body.
Courtesy of SUBARU OF AMERICA, INC.	18762AA020	compressor special tool	Used for installing the No. 2 brake piston return spring. NOTE: Used together with OIL PUMP PULLER (09350-07020) and PIPE (09351-04010).
Courtesy of SUBARU OF AMERICA, INC.	18762AA030	compressor special tool	Used for removing and installing the No. 3 brake piston return spring.
Courtesy of SUBARU OF AMERICA, INC.	99099AJ000	ENGINE HANGER	Used for removing and installing transmission body. NOTE: Used together with ADJUSTER (18679AA020).
Courtesy of SUBARU OF AMERICA, INC.	09320-89010	COMPRESSOR TRANSFER CLUTCH SPR	Used for removing and installing the direct clutch piston.
Courtesy of SUBARU OF AMERICA, INC.	09325-40010	TRANSMISSION OIL PLUG	Used for installing the extension case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	09350-06120	TERMINAL NO. 2 MAJOR	Used for measuring the piston stroke of the No. 2 brake piston.
Courtesy of SUBARU OF AMERICA, INC.	09350-07020	OIL PUMP PULLER	Used for installing the No. 1 brake piston return spring. NOTE: Used together with PIPE (09351-04010) and SPRING COMPRESSOR NO. 1 (09351-04020). Used for installing the No. 2 brake piston return spring. NOTE: Used together with compressor special tool (18762AA020) and PIPE (09351-04010).
Courtesy of SUBARU OF AMERICA, INC.	09350-07050	COMPRESSOR PISTON SPR NO. 3	Used for removing and installing the 1st & reverse brake return spring.
Courtesy of SUBARU OF AMERICA, INC.	09350-07080	PULLER BRAKE REACTION SLEEVE	Used for removing the brake reaction sleeve.
Courtesy of SUBARU OF AMERICA, INC.	09350-07090	BRAKE NO. 1 PISTON PULLER	Used for removing the No. 4 brake piston.
Courtesy of SUBARU OF AMERICA, INC.	09351-32010	TOOL ONEWAY CLUTCH TEST	Used for unit inspection of torque converter. NOTE: Used together with STOPPER STATOR (09351-32020).
Courtesy of SUBARU OF AMERICA, INC.	09351-32020	STOPPER STATOR	Used for unit inspection of torque converter. NOTE: Used together with TOOL ONEWAY CLUTCH TEST (09351 - 32010).
Courtesy of SUBARU OF AMERICA, INC.	09351-04010	PIPE	Used for installing the No. 1 brake piston return spring. NOTE: Used together with OIL PUMP PULLER (09350-07020) and SPRING COMPRESSOR NO. 1 (09351-04020). Used for installing the No. 2 brake piston return spring. NOTE: Used together with compressor special tool (18762AA020) and OIL PUMP PULLER (09350-07020).
Courtesy of SUBARU OF AMERICA, INC.	09351-04020	SPRING COMPRESSOR NO. 1	Used for installing the No. 1 brake piston return spring. NOTE: Used together with OIL PUMP PULLER (09350-07020) and PIPE (09351-04010).
Courtesy of SUBARU OF AMERICA, INC.	09387-00070	WRENCH 1st & Rev BRAKE	Used for removing and installing the No. 3 clutch balancer.
Courtesy of SUBARU OF AMERICA, INC.	09387-00110	CLUTCH COMPRESSION WRENCH	Used for removing and installing the No. 1 clutch balancer.
Courtesy of SUBARU OF AMERICA, INC.	12281-38150	ENGINE HANGER NO. 1	Used for removing and installing transmission body. NOTE: Used together with BOLT (90119-14120).
Courtesy of SUBARU OF AMERICA, INC.	90119-14120	BOLT	Used for removing and installing transmission body. NOTE: Used together with ENGINE HANGER NO. 1 (12281-38150).
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application. Used together with interface for Subaru Select Monitor (such as DST-i and DST-010).