DTC P0613: TCM Processor: Notes
DTC detecting condition: Immediately at fault recognition
Trouble symptom: Improper gear shifting
- CHECK DTC
.
- Using the Subaru Select Monitor, perform the clear memory of [Transmission]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC P0613 displayed?
Yes: Go to 2.
No: Current condition is normal. Check for interference from noise, etc.
- CHECK DTC
.
Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Besides DTC P0613, is any of DTC U0073, U0100 U0122, U0401, U0416, U1C00, U1C07, U1D00, U1D07, U1E00 or U1E07 displayed?
Yes: Perform the diagnosis according to DTCs other than P0613. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No: Go to 3.
- CHECK DTC
.
Check the battery. Ref. to STARTING/CHARGING SYSTEMS (H4DO)>BATTERY>INSPECTION .
Is the check result OK?
Yes: Replace the TCM. Ref. to AUTOMATIC TRANSMISSION>TRANSMISSION CONTROL MODULE (TCM) .
No: Charge or replace the battery. Ref. to STARTING/CHARGING SYSTEMS (H4DO)>BATTERY .