LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Installation >> Hood Lock Assembly

Hood Lock Assembly

  1. Check the cable for deformation such as fray before installation.
  2. Install the cable assembly front hood.
  3. Install the lock assembly front hood.
    1. Adjust and install the lock assembly front hood.
      NOTE: Refer to "ADJUSTMENT" of the lock assembly front hood. Ref. to SECURITY AND LOCKS>FRONT HOOD LOCK ASSEMBLY>ADJUSTMENT .

      Tightening torque: 

      33 N.m (3.4 kgf-m, 24.3 ft-lb)

    2. Install the harness clip and the connector clip.
    3. Connect the connector.
  4. Install the air cleaner case. Ref. to INTAKE (INDUCTION) (H4DO)>AIR CLEANER CASE>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Check the clearance and surface level gap between hood COMPL front and bumper face front, and adjust if it is outside the standard value. Ref. to EXTERIOR BODY PANELS>FRONT HOOD>ADJUSTMENT .
scientia non olet · About LEMON Manuals