LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Front Hood Lock Assembly >> Inspection >> Unit Inspection

Unit Inspection

  1. Check hood switch

    Measure the resistance between connector terminals.

    G12398799Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 LOCK 1 MΩ or more
    UNLOCK Less than 1 Ω
  2. Replace the lock assembly front hood if faulty is found in the inspection.
scientia non olet · About LEMON Manuals