LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Diagnostics) >> Work Support >> List

Work Support: List

Work Support item Contents Remarks
Variable compressor break-in drive [Variable compressor break-in drive] must be performed due to the compressor protection, when the compressor assembly was replaced with a new one. For more detail, refer to the compressor installation. Ref. to AIR CONDITIONER>COMPRESSOR>INSTALLATION .
Read Control module setting information(1) If the A/C Control Module is replaced, it is possible to read the A/C personal setting information of the driver monitoring system set by the user using Subaru Select Monitor, and write it to the new A/C Control Module.
  • Ignition switch ON
  • According to the display screen, save and close the file.
NOTE: Engine ON is recommended.
Write Control module setting information (1) If the A/C Control Module is replaced, it is possible to read the A/C personal setting information of the driver monitoring system set by the user using Subaru Select Monitor, and write it to the new A/C Control Module.
  • Ignition switch ON
  • Perform the operation according to the display screen.
NOTE: Engine ON is recommended.
(1) With driver monitoring system
scientia non olet · About LEMON Manuals