Check Switch Assembly EPB

Turn the ignition switch to OFF.
Disconnect the connector from the switch assembly EPB.

Check the resistance between switch assembly EPB terminals.

Preparation tool:

Circuit tester

G13199809

Courtesy of SUBARU OF AMERICA, INC.

Switch position	Terminal No.	Standard
Press (Release)	5 - 2 5 - 4	Less than 1 Ω
Neutral	1 - 2 4 - 5	1 MΩ or more
Neutral	5 - 1 2 - 4	Less than 1 Ω
Pull (Lock)	5 - 1 5 - 2	Less than 1 Ω

Replace the switch assembly EPB if the inspection result is not within the standard value.