Inspection Mode 6
| DTC | Description & trouble part | Note |
|---|---|---|
| B2B11 | Passenger's Poor Power Window Driver's Poor Manual Up Switch Stuck | - |
| B2B14 | RR POOR POWER WINDOW PRIVER'S POOR MANUAL UP SWITCH STUCK | - |
| B2B17 | RL POOR POWER WINDOW PRIVER'S POOR MANUAL UP SWITCH STUCK | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] DTC and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Using the driver's side power window switch, operate the manual up feature and check that the window rolls up.
- Using the Subaru Select Monitor, read the [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] DTC and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.