Inspection Mode 3
| DTC | Item | Note |
|---|---|---|
| B2405 | LIGHT SENSOR DESTINATION MISMATCH | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Automatic Light and Wiper]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Turn the ignition switch to ON.
- Perform [Sensor initial setting]. Ref. to AUTOMATIC LIGHT AND WIPER (DIAGNOSTICS)>WORK SUPPORT .
- Using the Subaru Select Monitor, read the DTC of [Automatic Light and Wiper] to check that there is no DTC displayed. Ref. to AUTOMATIC LIGHT AND WIPER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.