360-Degree Surround View Monitor/Multi View Monitor (Diagnostics)

• Basic Diagnostic Procedure
  • Procedure
• Check List for Interview
  • Check
• General Description
  • Caution
    • 360-degree Surround View Monitor (Multi View Monitor)
  • Inspection
    • Notes
    • Basic Inspection
  • Preparation Tool
    • SUBARU Special Tool
    • Other
  • System Block Diagram
  • Note
    • Notes
    • Front View/Side View/Rear View
• Electrical Component Location
  • Location
• Control Module I/O Signal
  • Electrical Specification
    • Camera Control Module
• Inspection Mode
  • Procedure
    • Notes
    • Inspection Mode 1
• Diagnostic Procedure for Subaru Select Monitor Communication
  • Inspection
• Data Monitor
  • Operation
  • List
• Customize
  • Operation
  • List
• Work Support
  • Operation
  • List
• Diagnostic Trouble Code (DTC)
  • Operation
  • List
• Diagnostic Procedure with Diagnostic Trouble Code (DTC)
  • DTC B2D00: Camera Ecu Internal Failure
  • DTC B2D01: Front Camera Wiring Harness Open Circuit Or Trouble (Power)
  • DTC B2D03: Rear Camera Wiring Harness Open Circuit Or Trouble (Power)
  • DTC B2D04: Front Camera Wiring Harness Open Circuit Or Trouble (Image)
  • DTC B2D06: Rear Camera Wiring Harness Open Circuit Or Trouble (Image)
  • DTC B2D07: Camera Ecu Low Voltage (Less Than 9V)
  • DTC B2D08: Camera Ecu High Voltage (More Than 16V)
  • DTC B2D0A: Left Side Camera Circuit Open (Power)
  • DTC B2D0B: Right Side Camera Circuit Open (Power)
  • DTC B2D0C: Left Side Camera Circuit Open (Image)
  • DTC B2D0D: Right Side Camera Circuit Open (Image)
  • DDTC B2D11: Incomplete Calibration
  • DTC U007A: Control Module Communication Bus "H" Off
  • DTC U0100: Lost Communication With ECM/Pcm "A"
  • DTC U0101: Lost Communication With TCM
  • DTC U0122: Lost Communication With Vehicle Dynamics Control Module
  • DTC U0128: Lost Communication With Park Brake Control Module
  • DTC U0140: Lost Communication With Body Control Module
  • DTC U0155: Lost Communication With Instrument Panel Cluster (IPC) Control Module
  • DTC U0162: Lost Communication With Audio Visual Navigation Display Module
  • DTC U0401: Invalid Data Received From ECM/Pcm "A"
  • DTC U0402: Invalid Data Received From TCM
  • DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module
  • DTC U0417: Invalid Data Received From Park Brake Control Module
  • DTC U0422: Invalid Data Received From Body Control Module
  • DTC U0423: Invalid Data Received From Instrument Panel Cluster Control Module
  • DTC U0463: Invalid Data Received From Navigation Display Module
  • DTC U114C: Lost Communication With Gateway "A" SA-Bus
  • DTC U1232: Lost Communication With Rear/Side Radar Control Module
  • DTC U1283: Lost Communication With Eyesight SA-Bus
  • DTC U144D: Invalid Data Received From Gateway "A" SA-Bus
  • DTC U1533: Invalid Data Received From Rear/Side Radar Control Module
  • DTC U1584: Invalid Data Received From Eyesight SA-Bus
• Diagnostics with Phenomenon
  • List
  • Inspection
    • The Screen Does Not Change To The Camera Screen When The Select Lever Is In The Reverse Position
    • Unable To Change The Camera Screen Using The View Button