LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Entertainment System >> Control Unit >> Removal >> MULTIVIEW Control Module

MULTIVIEW Control Module

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>REMOVAL .
  4. Remove the multiview control assembly.
    1. Disconnect the cable CCM connector.
    2. Remove the screws to remove the multiview control assembly.
      NOTE: Remove the screws on LH side in the same procedure as on the RH side.
G16441535Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals