LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Limited, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> M/T Clutch System >> Clutch Switch >> Inspection >> Clutch Start Switch >> Unit Inspection

Unit Inspection

  1. Check that there is no deformation, cracks, and any other damage.
  2. Measure the resistance between switch terminals.
    G14612001Courtesy of SUBARU OF AMERICA, INC.
    G14612000Courtesy of SUBARU OF AMERICA, INC.

    Terminal No.: 

    1 - 2

    Judgment standards: 

    When section (A) is 9.0 - 10.0 mm (0.35 - 0.39 in) long, it turns ON ←→ OFF.

    Resistance value: 

    ON: Less than 1 Ω

    OFF: 1 MΩ or more