LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Push Button Start Function >> MT model

MT model

  1. Get into the vehicle while carrying the access key, with the clutch pedal OFF, and check that it cycles through ignition switch OFF → ACC ON → ignition switch ON → ignition switch OFF every time the push button ignition switch is pressed, and that the indicator light for the push button ignition switch is illuminated in orange when the ignition switch is in the ACC ON and ignition switch ON positions.
  2. Get into the vehicle while carrying the access key, with the clutch pedal ON, check that the indicator light for the push button ignition switch is illuminated in green.
  3. Get into the vehicle while carrying the access key, with the clutch pedal ON, check that the engine starts when you press the push button ignition switch.
  4. With the vehicle stopped and the engine running, check that the engine stops when you press the push button ignition switch.
scientia non olet · About LEMON Manuals