Engine Starting System & Charging System: General Description: Specification: Starter
- CVT model
| Type | Reduction type | ||
|---|---|---|---|
| Model | M000TC0472 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 1.2 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | ||
| Number of pinion teeth | 9 | ||
| Armature commutator runout | mm (in) | Standard | 0.05 (0.0020) |
| Limit | 0.10 (0.0039) | ||
| Armature depth of segment mold | mm (in) | Standard | 0.50 (0.020) |
| Brush length | mm (in) | Standard | 12.45 (0.490) |
| Limit | 5.0 (0.197) | ||
| Brush spring force | N (kgf, lbf) | Standard | 12.3 - 16.7 (1.25 - 1.70, 2.77 - 3.75) |
| Limit | 3.6 (0.37, 0.81) | ||
| No-load characteristics | Voltage | 11 V | |
| Current | 90 A or less | ||
- MT model
| Type | Reduction type | ||
|---|---|---|---|
| Model | M000TD1571 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 1.0 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | ||
| Number of pinion teeth | 8 | ||
| Armature commutator runout | mm (in) | Standard | 0.05 (0.0020) |
| Limit | 0.10 (0.0039) | ||
| Armature depth of segment mold | mm (in) | Standard | 0.50 (0.020) |
| Brush length | mm (in) | Standard | 12.3 (0.484) |
| Limit | 7.0 (0.276) | ||
| Brush spring force | N (kgf, lbf) | Standard | 15.9 - 19.5 (1.62 - 1.99, 3.57 - 4.38) |
| Limit | 2.5 (0.25, 0.56) | ||
| No-load characteristics | Voltage | 11 V | |
| Current | 95 A or less | ||