Parking Brake Cable: Installation

Install the cable assembly hand brake.
1. Install the cable assembly hand brake to the parking lever. Ref. to PARKING BRAKE>PARKING BRAKE ASSEMBLY (REAR DISC BRAKE)>INSTALLATION .
2. Install the clamp hand brake cable.
3. Install the grommet to the floor.
4. Install the cable assembly hand brake.
  Tightening torque:
  
  18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the rear exhaust pipe. Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>INSTALLATION .
Install the fuel tank protector. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL TANK PROTECTOR>INSTALLATION .
Install the clamp hand brake.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Apply grease to the sliding area of the inner cable end and install it to the equalizer.
Preparation items:

Grease: NIPPON GREASE Spray Grease G2272 or equivalent
Install a new flange lock nut.
Adjust the parking brake. Ref. to PARKING BRAKE>PARKING BRAKE ASSEMBLY (REAR DISC BRAKE)>ADJUSTMENT .
Install the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
Install the rear wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .