Inspection Mode 8

Diagnostic procedure: 

1. Using the Subaru Select Monitor, perform the clear memory of [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
2. Using the Subaru Select Monitor, read the [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] DTC and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS) >DIAGNOSTIC TROUBLE CODE (DTC) 
   NOTE:

   If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step   1 . 

3. Using the passenger's side, rear right seat or rear left seat side power window switch, operate the automatic up/down feature and check that the window rolls up and down.
4. Using the Subaru Select Monitor, read DTC of [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS) >DIAGNOSTIC TROUBLE CODE (DTC) 
   NOTE:

   If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.