Inspection Of Switch Unit

Measure the resistance between connector terminals.

G14612426

Courtesy of SUBARU OF AMERICA, INC.

Front switch

Terminal No.	Inspection conditions	Standard
B2 - B3	MIST	Less than 1 Ω
B2 - B4	MIST	Less than 1 MΩ
B1 - B3	OFF	Less than 1 Ω
B1 - B3	INT	Less than 1 Ω
B9 - B10	INT	Less than 1 Ω
B2 - B3	LO	Less than 1 Ω
B2 - B4	HI	Less than 1 Ω

Washer switch

Terminal No.	Inspection conditions	Standard
A2 - A3	ON	Less than 1 Ω

INT volume switch

Terminal No.	Inspection conditions	Standard
B7 - B8	P1	Less than 1 Ω
	P2	Approx. 2 kΩ
	P3	Approx. 4 kΩ
	P4	Approx. 6 kΩ

Replace the switch assembly combination wiper if the inspection result is not within the standard value.