LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Reverse Automatic Braking System >> Reverse Automatic Braking Control Module >> Removal

Reverse Automatic Braking Control Module: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the trunk trim panel side. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>REMOVAL
  3. Remove the sonar control module assembly.
    1. Disconnect the connector.
    2. Remove the nuts, and then remove the sonar control module assembly.
      G14613239Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals