LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC Control Module and Hydraulic Control Unit (VDC CONTROL MODULE & H/U) >> Maintenance Mode >> VDC Control Module Parameter Reading

VDC Control Module Parameter Reading

NOTE:

When the VDC Control Module & H/U is replaced with a replacement part, be sure to perform the parameter selection/registration to the VDC Control Module & H/U using the "VDC Control Module parameter selection" function. 

  1. Using the Subaru Select Monitor, select [Reading of parameter: ECM to SSM] in [Work Support] of [Brake Control]. Ref. to COMMON (DIAGNOSTICS)>WORK SUPPORT .
  2. Save and close the file.
scientia non olet · About LEMON Manuals