LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Data Communication Module >> Installation >> Backup Battery

Backup Battery

  1. Install the backup battery, and connect the connector.
  2. Install the battery cover using TORX® T10.

    Tightening torque: 

    0.3 N.m (0.03 kgf-m, 0.2 ft-lb)

  3. Install the data communication module. Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>DATA COMMUNICATION MODULE 
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals