LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (M/T Clutch System) >> Clutch Switch >> Installation >> Clutch Start Switch

Clutch Start Switch

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily install the clutch start switch.
  2. Adjust the amount of protrusion for the clutch start switch. Ref. to CLUTCH SYSTEM>CLUTCH SWITCH>ADJUSTMENT 
  3. Connect the connector to the clutch start switch.
  4. Install the duct foot driver. Ref. to AIR CONDITIONER>AIR VENT DUCT>INSTALLATION>FOOT DUCT
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  6. Carry out an operation inspection for the clutch start switch. Ref. to CLUTCH SYSTEM>CLUTCH SWITCH>INSPECTION 
scientia non olet · About LEMON Manuals