Inspection Mode 4
| DTC | Description & trouble part | Note |
|---|---|---|
| B2282 | VEHICLE SPEED SIGNAL CORRELATION | - |
| B2283 | VEHICLE SPEED SENSOR | - |
Diagnostic procedure:
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Keyless Access with Push Button Start]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
- Using the Subaru Select Monitor, read the DTC of [Keyless Access with Push Button Start] to check that there is no DTC displayed. Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1 .
- Drive for 20 seconds or more at a vehicle speed of 25 km/h (15.5 MPH) or more.
- Using the Subaru Select Monitor, read the DTC of [Keyless Access with Push Button Start] to check that there is no DTC displayed. Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1 .