LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Outback Wilderness >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr690) >> Extension Case Oil Seal >> Replacement

Extension Case Oil Seal: Replacement

  1. Release the parking brake.
  2. Release the shift lock and shift the select lever to the "N range". Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL
  3. Remove the propeller shaft. Ref. to PROPELLER SHAFT/DRIVE SHAFT/AXLE>PROPELLER SHAFT>REMOVAL .
  4. Remove the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>REMOVAL>CENTER EXHAUST PIPE (REAR) .
  5. Remove the extension case oil seal using a flat tip screwdriver wrapped with protection tape, etc.
    G13951037Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the extension case oil seal using a flat tip screwdriver wrapped with vinyl tape, etc.
    NOTE:

    Apply CVTF to the oil seal lip and peripheral surface. 

    Preparation tool: 

    ST: INSTALLER (498057300)

    G13951038Courtesy of SUBARU OF AMERICA, INC.
  7. Install the center exhaust pipe (rear). Ref. to CENTER EXHAUST PIPE (REAR) .
  8. Install the center exhaust pipe (rear). Ref. to PROPELLER SHAFT / DRIVE SHAFT / AXLE>PROPELLER SHAFT>INSTALLATION
  9. Install the propeller shaft. Ref. to PROPELLER SHAFT/DRIVE SHAFT/AXLE>PROPELLER SHAFT>INSTALLATION .
  10. Apply the parking brake.
  11. Check the CVTF level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CVTF>INSPECTION .
scientia non olet · About LEMON Manuals