Variant Work: Notes
Perform when replacing the combination meter assembly.
- When communication with Subaru Select Monitor is possible ([Read and store the ECM setting information] is workable): Perform the operation procedure A.
- When communication with Subaru Select Monitor is possible ([Read and store the ECM setting information] is not workable): Perform the operation procedure B.
CAUTION:
When incorrect information is written by [Reading and Writing of the ECU Configuration Information and Odometer Value], [Write ECU setting save data] and [Write ECU setting 12 columns of models], a new combination meter cannot be used because correct information is not displayed. Obtain another new combination meter and write information again.
| Item | Contents | ||
| [Read Control module setting information] | Read the setting information from the combination meter before replacement, and save it to the Subaru Select Monitor. *1 | ||
| [Write Control module setting information] | [Write ECU setting save data] | Write the setting information saved by [Read Control module setting information] to the new combination meter. *2 | |
| [Write ECU setting 12 columns of models] | Using applied models and option codes, write the setting information to the new combination meter. *2 | ||
| [Reading and Writing of the ECU Configuration Information and Odometer Value] | Read the setting information and odometer value from the combination meter before replacement, and write them to the new combination meter. | ||
- *1: Odometer value reading and storing are not possible
- *2: Odometer value writing is not possible