SUBARU Special Tool

WARNING: This page is about a different variant/trim than selected.

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	18334AA020	PULLEY WRENCH PIN SET	Used for removing and installing water pump pulley. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for removing and installing water pump pulley. Used with PULLEY WRENCH PIN SET (18334AA020).
Courtesy of SUBARU OF AMERICA, INC.	18360AA040	HANGER	Used for removing and installing the water pipe LH. Used together with BOLT (18363AA050).
Courtesy of SUBARU OF AMERICA, INC.	18363AA050	BOLT	Used for removing and installing the water pipe LH. Used together with HANGER (18360AA040).
Courtesy of SUBARU OF AMERICA, INC.	18460AA150	CHECK BOARD	Used for measuring voltage and resistance of ECM terminals.
Courtesy of SUBARU OF AMERICA, INC.	45099SJ000	ST COOLANT CHARGER	Used for filling the radiator with engine coolant.
Courtesy of SUBARU OF AMERICA, INC.	73099SG000	SPECIAL TOOL CONDENSER	Used for removing and installing the radiator.
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application. Used together with interface for Subaru Select Monitor (such as DST-i and DST-010)