LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Outback Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake Switch >> Inspection

Parking Brake Switch: Inspection

  1. Check the resistance between switch assembly EPB terminals.
    G13950164Courtesy of SUBARU OF AMERICA, INC.
    Switch position Terminal No. Standard
    Press
    (Release)    		 5 - 2
    5 - 4    		 Less than 1 Ω
    Neutral 5 - 1
    2 - 4    		 Less than 1 Ω
    Pull
    (Lock)    		 5 - 1
    5 - 2    		 Less than 1 Ω
  2. Apply battery voltage between the connector terminals to check the lighting condition of the indicator light and illumination inside the switch.
    CAUTION:
    1. When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
    2. Incorrect polarity connection may cause LED damage inside the switch.
    G13950164Courtesy of SUBARU OF AMERICA, INC.
    • indicator light
      Terminal No. Inspection conditions Specification
      6 (+) - 10 (-) Apply battery voltage. Light ON
    • Illumination light
      Terminal No. Inspection conditions Specification
      7 (+) - 9 (-) Apply battery voltage. Light ON
  3. Replace the switch assembly EPB if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals