LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Outback Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Diagnostics) (2 Of 2) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P2746: Intermediate Shaft Speed Sensor "B" Circuit Range/Performance >> Notes

DTC P2746: Intermediate Shaft Speed Sensor "B" Circuit Range/Performance: Notes

  1. - 

    DTC detecting condition: 

    Immediately at fault recognition

    Trouble symptom: 

    • Standing start problems
    • Shock occurs when engaging the lockup clutch.
    • Shock occurs when selecting shift position.
    CAUTION:

    After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to  TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE  . 

  1. CHECK DTC  .

    Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

    Besides DTC P2746, is DTC P2747 or P2751 displayed?

    Yes:  Perform the diagnosis according to DTCs other than P2746. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .

    No:  Perform the diagnosis according to DTC P2747. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P2747: INTERMEDIATE SHAFT SPEED SENSOR "B" CIRCUIT NO SIGNAL .

scientia non olet · About LEMON Manuals