LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Forester Base >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> General Description >> Preparation Tool >> Special Tool

Special Tool

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G13603041Courtesy of SUBARU OF AMERICA, INC.
 398177700 INSTALLER Used for installing the rear bearing inner race. (VB-type)
G13602175Courtesy of SUBARU OF AMERICA, INC.
 398217700 ATTACHMENT SET Used for disassembly and assembly of differential carrier.
G13602188Courtesy of SUBARU OF AMERICA, INC.
 398417700 DRIFT Used for installing the side bearing outer race. (VB-type)
G05002437Courtesy of SUBARU OF AMERICA, INC.
 398437700 OIL SEAL INSTALLER Used for installing the differential side retainer oil seal. (VB-type)
G13620940Courtesy of SUBARU OF AMERICA, INC.
 398477701 HANDLE
  • Used for installing the front bearing outer race. (VA-type)
    NOTE: Used together with DRIFT (498447110).
  • Used for installing the rear bearing outer race.
NOTE:
  • Used together with DRIFT (398477702). (VA-type)
  • Used together with DRIFT 2 (398477703). (VB-type)
G05342961Courtesy of SUBARU OF AMERICA, INC.
 398477702 DRIFT
  • Used for installing the rear bearing outer race. (VA-type)
    NOTE: Used together with HANDLE (398477701).
  • Used for installing the side bearing outer race. (VA-type)
G05032452Courtesy of SUBARU OF AMERICA, INC.
 398477703 DRIFT 2
  • Used for installing the front bearing outer race. (VB-type)
    NOTE: Used together with INSTALLER (18654AA000).
  • Used for installing the rear bearing outer race. (VB-type)
NOTE: Used together with HANDLE (398477701).
G13602186Courtesy of SUBARU OF AMERICA, INC.
 398487700 DRIFT Used for installing the side bearing inner race. (VB-type)
G13603043Courtesy of SUBARU OF AMERICA, INC.
 398497701 SEAT Used for removing the side bearing inner race. (VB-type)
NOTE: Used together with PULLER SET (899524100).
G13602182Courtesy of SUBARU OF AMERICA, INC.
 398507704 BLOCK Used for adjusting preload for front bearing and rear bearing. (VA-type)
NOTE: Used together with DUMMY SHAFT (498447150).
G13591889Courtesy of SUBARU OF AMERICA, INC.
 398527700 PULLER ASSY Used for removing the side bearing outer race.
NOTE: Used together with CLAW (18760AA000). (VB-type)
G13602195Courtesy of SUBARU OF AMERICA, INC.
 399520105 SEAT Used for removing the side bearing inner race. (VA-type)
NOTE: Used together with PULLER SET (899524100).
G13603046Courtesy of SUBARU OF AMERICA, INC.
 399703600 PULLER ASSY Used for removing companion flange.
G13602179Courtesy of SUBARU OF AMERICA, INC.
 399780104 WEIGHT Used for installing the front bearing inner race, pilot bearing, differential front oil seal and companion flange.
G05002944Courtesy of SUBARU OF AMERICA, INC.
 498077400 REMOVER Used for removing the drive pinion. (VA-type)
G13604150Courtesy of SUBARU OF AMERICA, INC.
 498175500 INSTALLER Used for installing the rear bearing inner race. (VA-type)
G13602177Courtesy of SUBARU OF AMERICA, INC.
 498427200 FLANGE WRENCH
  • Used for removing and installing the self-locking nut of companion flange.
  • Used for adjusting hypoid gear set backlash.
  • Used for adjusting preload on the side bearing.
G08318430Courtesy of SUBARU OF AMERICA, INC.
 498447100 INSTALLER Used for installing the differential side retainer oil seal. (VA-type)
G13602199Courtesy of SUBARU OF AMERICA, INC.
 498447110 DRIFT Used for installing the front bearing outer race. (VA-type)
NOTE: Used together with HANDLE (398477701).
G13602176Courtesy of SUBARU OF AMERICA, INC.
 498447120 INSTALLER Used for installing the differential front oil seal.
G13602200Courtesy of SUBARU OF AMERICA, INC.
 498447150 DUMMY SHAFT
  • Used for adjusting preload for front bearing and rear bearing. (VA-type)
    NOTE: Used together with BLOCK (398507704).
  • Used for adjusting drive pinion height. (VA-type)
NOTE: Used together with DIFFERENTIAL CARRIER GAUGE (498505501).
G13602197Courtesy of SUBARU OF AMERICA, INC.
 498485400 DRIFT Used for installing the side bearing inner race. (VA-type)
G13602198Courtesy of SUBARU OF AMERICA, INC.
 498505501 DIFFERENTIAL CARRIER GAUGE Used for adjusting drive pinion height. (VA-type)
NOTE: Used together with DUMMY SHAFT (498447150).
G13602196Courtesy of SUBARU OF AMERICA, INC.
 899524100 PULLER SET Used for removing the side bearing inner race.
  • (1) Puller
  • (2) Cap
NOTE:
  • Used together with SEAT (399520105). (VA-type)
  • Used together with SEAT (398497701). (VB-type)
G05002459Courtesy of SUBARU OF AMERICA, INC.
 899580100 INSTALLER
  • Used for installing the front bearing inner race.
  • Used for installing the pilot bearing.
G13620960Courtesy of SUBARU OF AMERICA, INC.
 899874100 INSTALLER Used for installing the companion flange.
G13591918Courtesy of SUBARU OF AMERICA, INC.
 899904100 STRAIGHT PIN REMOVER Used for removing and installing the spring pin.
G13591922Courtesy of SUBARU OF AMERICA, INC.
 18270KA020 SOCKET (E20) Used for removing and installing the driven gear. (VA-type)
G13602207Courtesy of SUBARU OF AMERICA, INC.
 18654AA000 INSTALLER Used for installing the front bearing outer race. (VB-type)
NOTE: Used together with DRIFT 2 (398477703).
G13591433Courtesy of SUBARU OF AMERICA, INC.
 18658AA021 WRENCH COMPL RETAINER Used for removing and installing the differential side retainer.
G13602203Courtesy of SUBARU OF AMERICA, INC.
 18678AA000 DUMMY SHAFT
  • Used for adjusting preload for front bearing and rear bearing. (VB-type)
  • Used for adjusting drive pinion height. (VB-type)
NOTE: Used together with DIFFERENTIAL CARRIER GAUGE (18831AA010).
G05003213Courtesy of SUBARU OF AMERICA, INC.
 18720AA000 REMOVER Used for removing the drive pinion. (VB-type)
G05003217Courtesy of SUBARU OF AMERICA, INC.
 18760AA000 CLAW Used for removing the side bearing outer race. (VB-type)
NOTE: Used together with PULLER ASSY (398527700).
G13602206Courtesy of SUBARU OF AMERICA, INC.
 18831AA010 DIFFERENTIAL CARRIER GAUGE Used for adjusting drive pinion height. (VB-type)
NOTE: Used together with DUMMY SHAFT (18678AA000).
G13602189Courtesy of SUBARU OF AMERICA, INC.
 28099PA090 OIL SEAL PROTECTOR Used for installing the rear drive shaft. (For oil seal protection)
G07666153Courtesy of SUBARU OF AMERICA, INC.
 41399FG001 SPECIAL TOOL ASSY
  • Used for removing and installing the rear differential mount bushing.
    CAUTION: Apply the molybdenum grease on the threads.
  • Use (1), (2), (5), (6), (7), (8) and (9) for removal.
  • Use (3), (4), (5), (6), (7), (8) and (9) for installation.
  1. SPECIAL TOOL A (41399FG010)
  2. SPECIAL TOOL C (41399FG031)
  3. SPECIAL TOOL B (41399FG020)
  4. SPECIAL TOOL D (41399FG041)
  5. SPECIAL TOOL SLEEVE (41399FG050)
  6. SPECIAL TOOL RING (41399FG061)
  7. SPECIAL TOOL NUT (41399FG070)
  8. SPECIAL TOOL BEARING (41399FG080)
  9. SPECIAL TOOL SHAFT (41399FG091)
G13602211Courtesy of SUBARU OF AMERICA, INC.
 41399FG010 SPECIAL TOOL A Used for removing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G13602212Courtesy of SUBARU OF AMERICA, INC.
 41399FG020 SPECIAL TOOL B Used for installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G13602213Courtesy of SUBARU OF AMERICA, INC.
 41399FG031 SPECIAL TOOL C Used for removing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G13602214Courtesy of SUBARU OF AMERICA, INC.
 41399FG041 SPECIAL TOOL D Used for installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G08318447Courtesy of SUBARU OF AMERICA, INC.
 41399FG050 SPECIAL TOOL SLEEVE Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666159Courtesy of SUBARU OF AMERICA, INC.
 41399FG061 SPECIAL TOOL RING Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650010Courtesy of SUBARU OF AMERICA, INC.
 41399FG070 SPECIAL TOOL NUT Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G06650011Courtesy of SUBARU OF AMERICA, INC.
 41399FG080 SPECIAL TOOL BEARING Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G07666162Courtesy of SUBARU OF AMERICA, INC.
 41399FG091 SPECIAL TOOL SHAFT Used for removing and installing the rear differential mount bushing.
NOTE: For combination of tools, refer to "SPECIAL TOOL ASSY (41399FG001)".
G12515772Courtesy of SUBARU OF AMERICA, INC.
 - SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE:
  • For detailed operation procedures, refer to "Help" of application.
  • Used together with interface for Subaru Select Monitor (such as DST-i and DST-010).
scientia non olet · About LEMON Manuals