Active Test: List
NOTE:
Each output check continues to run for five seconds before stopping automatically.
- Keyless Access with Push Button Start(Power Supply)
Active test item Range Contents Execution condition STSW Output Turn on the STSW. (2) - Stop ACC Output Turn on the ACC. - Stop IGN1/2 Output Turn on the IGN1/2. - Stop Start SW character illumination lighted Output Perform ON output of the push button ignition switch backup light. (1) - Stop Start SW indicator lighted (green) Output Perform ON output of the push button ignition switch backup light. (1) - Stop Start SW indicator lighted (orange) Output Perform ON output of the push button ignition switch backup light. (1) - Stop (1) When lit by a condition other than for active test, it will not become unlit even when set to either OFF or no output. (2) When performed with ignition switch ON, engine will start. Therefore, great care must be exercised. - Keyless Access with Push Button Start(Collation)
Active test item Range Contents Execution condition Driver seat sensor power supply Output Perform the output check for the driver's door touch sensor. - Stop Passenger seat sensor power supply Output Perform the output check for the passenger's door touch sensor. - Stop Steering lock power supply Output Output the power supply signal from keyless access Control Module to steering lock Control Module. - Stop