Power Seat & Remote Control Mirror Control Module (Model With Seat Position Memory)

1. Prior to starting work, check the following precautions. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
2. Operate the switch to move the front seat (driver's seat) to the following positions.
   • Slide: rearmost end
   • Reclining: most upright
   • Lifter: downmost end
   • Tilt: downmost end
3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
4. Remove the driver's seat from the vehicle.
5. Remove the power seat & remote control mirror CONTROL MODULE.
   1. Disconnect the connector.
   2. Remove the nuts and remove the power seat & remote control mirror CONTROL MODULE.

Courtesy of SUBARU OF AMERICA, INC.