Inspection Mode G
| DTC | Description & trouble part | Condition |
|---|---|---|
| P0708 | TRANSMISSION RANGE SENSOR "A" CIRCUIT HIGH | - |
| P1603 | ENGINE STALL HISTORY | - |
Diagnostic procedure:
- Start the engine.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS) (CROSSTREK MODEL)>ALL READINESS DIAGNOSTIC CODE(S) .
- Depress the brake pedal and move the select lever to each range at an interval of five seconds.NOTE:
Move the select lever in the following order: "P" → "R" → "N" → "D" .
- Drive for three seconds at 16 km/h (10 MPH).NOTE:
Drive in "D" range and "R" range .
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Ref. to TRANSMISSION (DIAGNOSTICS) (CROSSTREK MODEL)>ALL READINESS DIAGNOSTIC CODE(S) .