LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Rear ABS Wheel Speed Sensor >> Installation >> LH Side

LH Side

CAUTION:
  • Be careful not to damage the sensor.
  • Do not apply excessive force to the sensor harness.
NOTE: Check the identification (mark) on the sensor harness to make sure there is no twisting. Ref. to VEHICLE STABILITY CONTROL>GENERAL DESCRIPTION>SPECIFICATION .
  1. Install the sensor sub assembly rear LH.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Connect the sensor sub assembly rear LH connector.
  3. Install the spacer rear floor front and cover backrest rear seat.
  4. Install the mat trunk.
  5. Install the rear wheel LH. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals