Oil Pressure Switch: Installation
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Apply seal material to the bolt threads of oil pressure switch.NOTE: Before applying the seal material, degrease the oil pressure switch and the thread portions of the chain cover.
Seal material:
THREE BOND 1324 (Part No. 004403042) or equivalent
- Install the oil pressure switch, and connect the connector.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Check the engine oil level and replenish the engine oil if necessary. Ref. to LUBRICATION (H4DOTC)>Engine Oil>INSPECTION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .