LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Rear Gate Opener Button >> Removal

Rear Gate Opener Button: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The switch opener rear gate of the model with keyless access with push button start is integrated with the rear lock button. For operation procedures, refer to "Rear Lock Button". Ref. to SECURITY AND LOCKS>Rear Lock Button>REMOVAL .
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>REMOVAL .
  3. Remove the garnish assembly rear gate, Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>REMOVAL .
  4. Remove the switch opener rear gate.
    CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage  .
    1. Remove the switch opener rear gate by pressing the lock portions on both sides.
G13201428Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals