LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Keyless Buzzer >> Removal

Keyless Buzzer: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the under cover front, Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL
  4. Remove the screw and clips, and turn over the mud guard front.
  5. Remove the keyless buzzer.
    1. Disconnect the connector.
    2. Remove the clip and detach the keyless buzzer.
    G13201463Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals