LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Front Hood Lock Assembly >> Removal

Front Hood Lock Assembly: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the bumper face front and the bracket grille front. Ref. to EXTERIOR/INTERIOR TRIM>Front Bumper>REMOVAL
  3. Remove the lock assembly front hood.
    1. Disconnect the connector.
    2. Remove the bolts and clips, and remove the lock assembly front hood.
      G13201434Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the cable assembly front hood.
    G13201435Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals