LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Seat System - Seats) >> Power Seat System >> Removal >> Power Seat Control Module

Power Seat Control Module

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prior to starting work, check the following precautions, Ref. to SEATS>General Description>CAUTION .
  2. Raise the seat cushion by operating the switch.
  3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Remove the driver's seat from the vehicle.
  5. Remove the ECM seat memory.
    1. Disconnect the connector.
    2. Remove the nuts and remove the ECM seat memory.
      G13201133Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals