LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Seat System - Seats) >> Power Seat System >> Installation >> Power Seat Control Module

Power Seat Control Module

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ECM seat memory.

    Tightening torque: 

    6.0 N.m (0.6 kgf-m, 4.4 ft-lb)

  2. Install the driver's seat. Ref. to SEATS>Front Seat>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals